Quantcast
Channel: Symantec Connect - Backup and Recovery - 讨论
Viewing all 6482 articles
Browse latest View live

Can no longer backup CIFS after migrating data to new NetApp Filer

0
0
我需要解决方案

We are using BackupExec 2010 R3. We have a NetApp FAS2020 running ONTAP 7.3.6. We were successfully backing up CIFS data to tape. This weekend we migrated the data to a new FAS2240 running ONTAP 8.1.2 (7-mode). I attempted to add the share to User-Defined Selections and get this error:

"An error was encountered while attempted to browse the contents of 10.1.0.X."

"A network connection to the server could not be established."

NDMPD is turned off on the filer. I can access the share through windows explorer. The system logon account has correct credentials and they are on the share with "full control" in the filer. In BackupExec I have "Enable selection of user shares" as checked in Options -> Network and Security.

I am not sure what else to try. This was working on previous system, now it doesn't work on this one. I read somewhere to change the NDMP port. I didn't try this because it is not enabled on the filer or in BackupExec.

I did CIFS audit on the filer and see the BackupExec Media Server trying to log in.

Any advice?


Backup Exec 2010R3 MP for SCOM 2007

0
0
我需要解决方案

Hi Everyone

I am monitoring our backup exec servers with SCOM 2012 & Backup Exec 2010R3 MP, i have many servers with monitoring enabled with no issues, however there is one server where i am getting no Backup Exec info at all and seeing errors in the event log.

the server is Windows 2003 Ent x64 SP2 running Backup Exec 12.5. the two recurring errors in the Operations manager event log are:

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Source: Health Service Modules EventID:  21405

The process started at 11:58:56 AM failed to create System.Discovery.Data, no errors detected in the output.  The process exited with 4294967295
 
Command executed: "C:\WINDOWS\system32\cscript.exe" /nologo "Server_Discovery.vbs" {DC5F9D20-487D-FD40-341E-7D7459301C2A} {BD6228DE-7052-7CE4-8EB7-8AED1B9324BF} servernamefqdn servername
Working Directory: C:\Program Files\System Center Operations Manager\Agent\Health Service State\Monitoring Host Temporary Files 16\7917\

One or more workflows were affected by this. 

Workflow name: Symantec_Backup_Exec_for_Windows_MPscom2007.DiscoverServer
Instance name: servername
Instance ID: {BD6228DE-7052-7CE4-8EB7-8AED1B9324BF}
Management group: groupname

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Source: Health Service Script EventID: 1010

Server_Discovery.vbs : Insuficient number of parameters. Script was aborted.

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

So the discovery script is failing somehow but i haven't been able to get a copy of the script to see what it is doing exactly.

i have tried the usual stuff like re-installing the agent, patching server with WSUS, deleting and re-adding the MP but still nothing. Has anyone out there seen this before ?? It's really annoying!

Catalog related issue

0
0
我需要解决方案

Hi All,

I am using backup exec 2010R3 and one of my catalog job completed with out byte count.

i renamed catalog folder and unchecked options " Request all media in the sequence for catalog operations "/"Use storage media-based catalogs" from tools catalogs options.

After rerunning catalog job starting and running properly with byte count, but problem is selected media is not being cataloged. for ex. i run catalog of media 32 but tape drive load & unload without running catalog and load other media 33 with cataloging properly.

i tried twice but facing the same problem please help..

 

Thanks..

Exchange restore 2007, ERROR: 10 Error: Invalid device

0
0
我需要解决方案

Restore exchange 2007 from B2D doesn't worked. I've already reset the account for backup (xchbackup) but still have no luck. Any help would greatly be appreciated.

 

This problem is occurring on and off and the restore seem never work smoothly driven me crazy.

 

Details as below:

 

[5548] 02/20/13 16:58:32 [server]             - JobEngine::LaunchJob
[5548] 02/20/13 16:58:32 [server]             - RunJobWithGuidAndServer( {E0ACCD28-011E-4413-ACE3-27DF37AE44E1}, VM1 ) = 0
[2980] 02/20/13 16:58:32 [server]             - Thread for job Restore 00502 ({E0ACCD28-011E-4413-ACE3-27DF37AE44E1}) starting
[2980] 02/20/13 16:58:32 [ndmp\ndmpclient]    - viaNetwork enabled 0
[2980] 02/20/13 16:58:32 [ndmp\ndmpclient]    - viaNetwork useAny 0
[2980] 02/20/13 16:58:32 [ndmp\ndmpclient]    - viaNetwork protocol 1
[2980] 02/20/13 16:58:32 [ndmp\ndmpclient]    - viaNetwork subnet ---><---
[2980] 02/20/13 16:58:32 [ndmp\ndmpclient]    - viaNetwork MAC ---><---
[2980] 02/20/13 16:58:32 [ndmp\ndmpclient]    - viaNetwork IPv4 Enabled 0
[2980] 02/20/13 16:58:32 [ndmp\ndmpclient]    - viaNetwork IPv4 subnetAddress 0.0.0.0
[2980] 02/20/13 16:58:32 [ndmp\ndmpclient]    - viaNetwork IPv4 subnetMask 0.0.0.0
[2980] 02/20/13 16:58:32 [ndmp\ndmpclient]    - viaNetwork IPv4 autoObtain 0
[2980] 02/20/13 16:58:32 [ndmp\ndmpclient]    - viaNetwork IPv4 physical
[2980] 02/20/13 16:58:32 [ndmp\ndmpclient]    - viaNetwork selectedProtocol 1
[2980] 02/20/13 16:58:32 [ndmp\ndmpclient]    - viaNetwork InterfaceIndexProtocol 0
[2980] 02/20/13 16:58:32 [ndmp\ndmpclient]    - viaNetwork InterfaceIndex 0
[2980] 02/20/13 16:58:32 [ndmp\ndmpclient]    - viaNetwork subnet <zero>
[2980] 02/20/13 16:58:32 [ndmp\ndmpclient]    - viaNetwork PrefixLength 0
[2980] 02/20/13 16:58:32 [ndmp\ndmpclient]    - viaNetwork ipAddr <zero>
[2980] 02/20/13 16:58:32 [ndmp\ndmpclient]    - viaNetwork FallBackOptions 0x6  NIC Subnet
[2652] 02/20/13 16:58:32 [server]             - Updating status for: 'Restore 00502' (0x0 0x0)
[2652] 02/20/13 16:58:32 [server]             - Status for: 'Restore 00502' updated
[2980] 02/20/13 16:58:32 [server]             - Checking for Evaluation expiration.
[2980] 02/20/13 16:58:32 [engapi]             - ENGSCRPT: ConvertDeviceName osId = 0X46
[2980] 02/20/13 16:58:32 [engapi]             - ENGSCRPT: IN - oldDeviceName = \\Exchange-Server.domain.com\Microsoft Information Store\First Storage Group
[2980] 02/20/13 16:58:32 [engapi]             - ENGSCRPT: OUT - newName = \\Exchange-Server.domain.com\Microsoft Information Store\First Storage Group
[2980] 02/20/13 16:58:32 [engapi]             - BSD date: 2:18:113 time: 21:3:42
[2980] 02/20/13 16:58:32 [server]             - Failed to Load AllowExcludes key, We will update DR file evenif there are userExcludes. Error: 5
[2980] 02/20/13 16:58:32 [server]             - Enter RestoreMessageHandler::SetTargetDeviceName
[2980] 02/20/13 16:58:32 [server]             -   OS ID is [0x46]
[2980] 02/20/13 16:58:32 [server]             -   Target OS ID is [0x46]
[2980] 02/20/13 16:58:32 [server]             -   Device Subtype is [0x2]
[2980] 02/20/13 16:58:32 [server]             -   Queried Device: \\Exchange-Server.domain.com\Microsoft Information Store\First Storage Group
[2980] 02/20/13 16:58:32 [server]             - Exit SetTargetDeviceName - deviceName: [\\Exchange-Server\Microsoft Information Store\First Storage Group]
[2980] 02/20/13 16:58:32 [loops]              - NDMPAgentConnector:SetupConnection(): Data Server = VM1
[2980] 02/20/13 16:58:32 [ndmp\ndmpcomm]      - Could not resolve the "bews-ndmp" or the "ndmp" service, error code: 10109, using port 10000
[2980] 02/20/13 16:58:32 [ndmp\ndmpcomm]      - ndmpConnectEx: 'VM1' resolves to the local machine itself. So, we will try and connect to a loopback address ...
[2980] 02/20/13 16:58:32 [ndmp\ndmpcomm]      - ndmpConnectEx : Control Connection information: A connection was established between end-points 127.0.0.1:3038 and 127.0.0.1:10000.
[2980] 02/20/13 16:58:32 [ndmp\ndmpclient]    - NDMP version 3 connection CONNECTED
[2980] 02/20/13 16:58:32 [loops]              - NDMPAgentConnector::AuthenticateClient(): Using SSPI authentication with SLA/DLA as a fallback
[2980] 02/20/13 16:58:32 [loops]              - NDMPAgentConnector::ConnectAuthUseSSPIasDefault(): Attempting SSPI authentication...
[2980] 02/20/13 16:58:33 [ndmp\ndmpcomm]      - NDMP_SSPI: InitializeSecurityContext status 0x00090312 in 0 out 57
[2980] 02/20/13 16:58:33 [ndmp\ndmpcomm]      - NDMP_SSPI: InitializeSecurityContext status 0x00000000 in 204 out 72
[2980] 02/20/13 16:58:33 [ndmp\ndmpcomm]      - NDMP_SSPI: client authenticated with server
[2980] 02/20/13 16:58:33 [loops]              - NDMPAgentConnector::ConnectAuthUseSSPIasDefault(): SSPI authentication success.
[2980] 02/20/13 16:58:33 [BESocket]           - @@@@@@@MyCloseSocket called with sockfd = 1652(0x674) retval = 0
[2980] 02/20/13 16:58:33 [loops]              - NDMPAgentConnector::EndConnection(): Data Server = VM1
[2980] 02/20/13 16:58:33 [loops]              - NDMPAgentConnector:SetupConnection(): Data Server = Exchange-Server
[2980] 02/20/13 16:58:33 [ndmp\ndmpcomm]      - Could not resolve the "bews-ndmp" or the "ndmp" service, error code: 10109, using port 10000
[2980] 02/20/13 16:58:33 [ndmp\ndmpcomm]      - ndmpConnectEx: Querying the neighbour advertisement cache to discover information on 'Exchange-Server' ...
[2980] 02/20/13 16:58:33 [ndmp\ndmpcomm]      - ndmpConnectEx : Control Connection information: A connection was established between end-points 192.168.50.34:3040 and 192.168.50.5:10000.
[2980] 02/20/13 16:58:33 [ndmp\ndmpclient]    - NDMP version 3 connection CONNECTED
[2980] 02/20/13 16:58:33 [loops]              - IsLocalAgent:beclass::BEConvertServerNamePlus returned error: 87
[2980] 02/20/13 16:58:33 [loops]              - IsLocalAgent:beclass::BEConvertServerNamePlus returned error: 87
[2980] 02/20/13 16:58:33 [BESocket]           - @@@@@@@MyCloseSocket called with sockfd = 1344(0x540) retval = 0
[2980] 02/20/13 16:58:33 [loops]              - NDMPAgentConnector::EndConnection(): Data Server = Exchange-Server
[2980] 02/20/13 16:58:33 [loops]              - In CustomReordereBSD.
[2980] 02/20/13 16:58:33 [server]             - Enter RestoreMessageHandler::GetMachineName
[2980] 02/20/13 16:58:33 [server]             - Exit GetMachineName - Machine name: [Exchange-Server]
[2980] 02/20/13 16:58:33 [server]             - Enter RestoreMessageHandler::GetMachineName
[2980] 02/20/13 16:58:33 [server]             - Exit GetMachineName - Machine name: [Exchange-Server]
[2980] 02/20/13 16:58:33 [loops]              - NDMPAgentConnector:SetupConnection(): Data Server = Exchange-Server
[2980] 02/20/13 16:58:33 [ndmp\ndmpcomm]      - Could not resolve the "bews-ndmp" or the "ndmp" service, error code: 10109, using port 10000
[2980] 02/20/13 16:58:33 [ndmp\ndmpcomm]      - ndmpConnectEx: Querying the neighbour advertisement cache to discover information on 'Exchange-Server' ...
[2980] 02/20/13 16:58:33 [ndmp\ndmpcomm]      - ndmpConnectEx : Control Connection information: A connection was established between end-points 192.168.50.34:3041 and 192.168.50.5:10000.
[2980] 02/20/13 16:58:33 [ndmp\ndmpclient]    - NDMP version 3 connection CONNECTED
[2980] 02/20/13 16:58:34 [loops]              - IsLocalAgent:beclass::BEConvertServerNamePlus returned error: 87
[2980] 02/20/13 16:58:34 [loops]              - IsLocalAgent:beclass::BEConvertServerNamePlus returned error: 87
[2980] 02/20/13 16:58:34 [loops]              - This BSD requires PDI restore. Checking to see if FS supports it
[2980] 02/20/13 16:58:34 [loops]              - NDMPRAHostRestoreEngine::IsPDIRestoreSupported( ) - Querying application server(Exchange-Server) for PDI support.
[2980] 02/20/13 16:58:34 [loops]              - Application server(Exchange-Server) supports PDI
[2980] 02/20/13 16:58:34 [loops]              - Querying PDI data store server(VM1) for PDI support.
[2980] 02/20/13 16:58:34 [loops]              - NDMPAgentConnector:SetupConnection(): Data Server = VM1
[2980] 02/20/13 16:58:34 [ndmp\ndmpcomm]      - Could not resolve the "bews-ndmp" or the "ndmp" service, error code: 10109, using port 10000
[2980] 02/20/13 16:58:34 [ndmp\ndmpcomm]      - ndmpConnectEx: 'VM1' resolves to the local machine itself. So, we will try and connect to a loopback address ...
[2980] 02/20/13 16:58:34 [ndmp\ndmpcomm]      - ndmpConnectEx : Control Connection information: A connection was established between end-points 127.0.0.1:3042 and 127.0.0.1:10000.
[2980] 02/20/13 16:58:34 [ndmp\ndmpclient]    - NDMP version 3 connection CONNECTED
[2980] 02/20/13 16:58:34 [loops]              - NDMPAgentConnector::AuthenticateClient(): Using Default Account for proxy Authentication
[2980] 02/20/13 16:58:34 [loops]              - NDMPEngine::SetupNDMPConnection(): Using the system default logon account
[2980] 02/20/13 16:58:34 [loops]              - PDI data store server(VM1) supports PDI
[2980] 02/20/13 16:58:34 [BESocket]           - @@@@@@@MyCloseSocket called with sockfd = 1728(0x6c0) retval = 0
[2980] 02/20/13 16:58:34 [loops]              - NDMPAgentConnector::EndConnection(): Data Server = VM1
[2980] 02/20/13 16:58:34 [loops]              - FS supports PDI.
[2980] 02/20/13 16:58:34 [server]             - Enter RestoreMessageHandler::SetTargetDeviceName
[2980] 02/20/13 16:58:34 [server]             -   OS ID is [0x46]
[2980] 02/20/13 16:58:34 [server]             -   Target OS ID is [0x46]
[2980] 02/20/13 16:58:34 [server]             -   Device Subtype is [0x1]
[2980] 02/20/13 16:58:35 [server]             -   Queried Device: \\Exchange-Server.domain.com\Microsoft Information Store\First Storage Group
[2980] 02/20/13 16:58:35 [server]             -   Setting target path: [ittest5]
[2980] 02/20/13 16:58:35 [server]             - Exit SetTargetDeviceName - deviceName: [\\Exchange-Server\Microsoft Information Store\First Storage Group]
[2980] 02/20/13 16:58:35 [loops]              - ValidatePDILocation: Validating PDI location: [F:\ExchangeBK\IMG001652]. Temp path: [C:\TEMP]
[2980] 02/20/13 16:58:35 [server]             - Media Label: IMG001652
[2980] 02/20/13 16:58:35 [loops]              - Trying to create backup BSD \\Exchange-Server.domain.com\Microsoft Information Store\First Storage Group for PDI restore
[2980] 02/20/13 16:58:35 [loops]              - Failed to Load AllowExcludes key, We will update DR file evenif there are userExcludes. Error: 5
[2980] 02/20/13 16:58:35 [loops]              - NDMPAgentConnector:SetupConnection(): Data Server = VM1
[2980] 02/20/13 16:58:35 [ndmp\ndmpcomm]      - Could not resolve the "bews-ndmp" or the "ndmp" service, error code: 10109, using port 10000
[2980] 02/20/13 16:58:35 [ndmp\ndmpcomm]      - ndmpConnectEx: 'VM1' resolves to the local machine itself. So, we will try and connect to a loopback address ...
[2980] 02/20/13 16:58:35 [ndmp\ndmpcomm]      - ndmpConnectEx : Control Connection information: A connection was established between end-points 127.0.0.1:3047 and 127.0.0.1:10000.
[2980] 02/20/13 16:58:35 [ndmp\ndmpclient]    - NDMP version 3 connection CONNECTED
[2980] 02/20/13 16:58:35 [loops]              - NDMPAgentConnector::AuthenticateClient(): Using SSPI authentication with SLA/DLA as a fallback
[2980] 02/20/13 16:58:35 [loops]              - NDMPAgentConnector::ConnectAuthUseSSPIasDefault(): Attempting SSPI authentication...
[2980] 02/20/13 16:58:35 [ndmp\ndmpcomm]      - NDMP_SSPI: InitializeSecurityContext status 0x00090312 in 0 out 57
[2980] 02/20/13 16:58:35 [ndmp\ndmpcomm]      - NDMP_SSPI: InitializeSecurityContext status 0x00000000 in 204 out 72
[2980] 02/20/13 16:58:35 [ndmp\ndmpcomm]      - NDMP_SSPI: client authenticated with server
[2980] 02/20/13 16:58:35 [loops]              - NDMPAgentConnector::ConnectAuthUseSSPIasDefault(): SSPI authentication success.
[2980] 02/20/13 16:58:35 [loops]              - PDIRestoreBSDProcessor::EstablishPDIDataConnection() - data connection established successfully.
[2980] 02/20/13 16:58:35 [loops]              - PDIRestoreBSDProcessor::ProcessPDIDataTransfer: Starting data transfer between Exchange-Server and VM1
[2652] 02/20/13 16:58:37 [server]             - Updating status for: 'Restore 00502' (0x0 0xB)
[2652] 02/20/13 16:58:37 [server]             - Status for: 'Restore 00502' updated
[2980] 02/20/13 16:58:41 [loops]              -  data halted: INTERNAL ERROR
[2980] 02/20/13 16:58:41 [ndmp\ndmpcomm]      - ERROR: 10 Error: Invalid device
[2980] 02/20/13 16:58:41 [server]             - Enter RestoreMessageHandler::GetMachineName
[2980] 02/20/13 16:58:41 [server]             - Exit GetMachineName - Machine name: [Exchange-Server]
[2980] 02/20/13 16:58:41 [BESocket]           - @@@@@@@MyCloseSocket called with sockfd = 1716(0x6b4) retval = 0
[2980] 02/20/13 16:58:41 [loops]              - NDMPAgentConnector::EndConnection(): Data Server = VM1
[2980] 02/20/13 16:58:41 [BESocket]           - @@@@@@@MyCloseSocket called with sockfd = 1344(0x540) retval = 0
[2980] 02/20/13 16:58:41 [loops]              - NDMPAgentConnector::EndConnection(): Data Server = Exchange-Server
[2980] 02/20/13 16:58:41 [server]             - Removing 'Restore 00502' from status update list
[2980] 02/20/13 16:58:41 [server]             - Updating status for: 'Restore 00502' (0x18 0xB)
[2980] 02/20/13 16:58:41 [server]             - Status for: 'Restore 00502' updated
[2980] 02/20/13 16:58:41 [server]             - Merging of BE / VSR Job Logs not necessary for this Type of Job
[2980] 02/20/13 16:58:41 [server]             - Ending job 'Restore 00502' with error status (-536836980)
[2980] 02/20/13 16:58:41 [server]             - Job thread terminating
 

tape getting ejected in middle of backup Job

0
0
我需要解决方案

Recently we brought a new tape drive HP LTO-4 Ultrium1760 , Am running Backupexec 2010 R3 -On win2008 R2

 

issue :-

 

Tape is getting ejected on the middle of a backup job.  At frist we thought of issue with the Tape drive, HP team as confrimed that tape drive having no issue.

 

 

viaNetwork failed to find a NIC that matches request

0
0
我需要解决方案

Hello everybody,
two days ago our UPS sent a power surge into our network, shutting down our complete internal infrastructure.

We replaced the faulty machine and went on with our daily tasks. But yesterday, our backup using Backup Exec 12.5 didn't work properly, it just "lost connection" halfway through. We backup six servers on tape, the servers being connected as follows:

1x the media server (backups from harddrive top tape)
1x directly connected via our switch stack
4x media server -> stack -> fiber switch -> remote servers
All of them being Windows Server 2008 R2 servers with absolutely no change in configuration since weeks.

The direct connections didn't lose connection, the others did. First to assume is that the fiber switch got some damage from the power surge, so I replaced it and tested again, doesn't matter, same problem. Then I debugged the test backup job on the media server (using specified NICs and subnets for each job), this is what the log says:

BENGINE:  [02.21.13 09:21:55] [0000]     [7328] 02/21/13 09:21:54 viaNetwork enabled 1
BENGINE:  [02.21.13 09:21:55] [0000]     [7328] 02/21/13 09:21:54 viaNetwork useAny 0
BENGINE:  [02.21.13 09:21:55] [0000]     [7328] 02/21/13 09:21:54 viaNetwork protocol 1
BENGINE:  [02.21.13 09:21:55] [0000]     [7328] 02/21/13 09:21:54 viaNetwork subnet --->192.168.0.0/24<---
BENGINE:  [02.21.13 09:21:55] [0000]     [7328] 02/21/13 09:21:54 viaNetwork MAC --->00-11-25-8E-71-F9<---
BENGINE:  [02.21.13 09:21:55] [0000]     [7328] 02/21/13 09:21:54 viaNetwork failed to find a NIC that matches request

So I changed the setting to automatically choose the appropriate NIC / subnet:

BENGINE:  [02.21.13 09:46:50] [0000]     [13392] 02/21/13 09:46:50 viaNetwork enabled 0
BENGINE:  [02.21.13 09:46:50] [0000]     [13392] 02/21/13 09:46:50 viaNetwork useAny 0
BENGINE:  [02.21.13 09:46:50] [0000]     [13392] 02/21/13 09:46:50 viaNetwork protocol 0
BENGINE:  [02.21.13 09:46:50] [0000]     [13392] 02/21/13 09:46:50 viaNetwork subnet --->192.168.0.0/24<---
BENGINE:  [02.21.13 09:46:50] [0000]     [13392] 02/21/13 09:46:50 viaNetwork MAC --->00-11-25-8E-71-F9<---
BENGINE:  [02.21.13 09:46:50] [0000]     [13392] 02/21/13 09:46:50 viaNetwork IPv4 Enabled 0
BENGINE:  [02.21.13 09:46:50] [0000]     [13392] 02/21/13 09:46:50 viaNetwork IPv4 subnetAddress 0.0.0.0
BENGINE:  [02.21.13 09:46:50] [0000]     [13392] 02/21/13 09:46:50 viaNetwork IPv4 subnetMask 0.0.0.0
BENGINE:  [02.21.13 09:46:50] [0000]     [13392] 02/21/13 09:46:50 viaNetwork IPv4 autoObtain 0
BENGINE:  [02.21.13 09:46:50] [0000]     [13392] 02/21/13 09:46:50 viaNetwork IPv4 physical
BENGINE:  [02.21.13 09:46:50] [0000]     [13392] 02/21/13 09:46:50 viaNetwork selectedProtocol 0
BENGINE:  [02.21.13 09:46:50] [0000]     [13392] 02/21/13 09:46:50 viaNetwork InterfaceIndexProtocol 0
BENGINE:  [02.21.13 09:46:50] [0000]     [13392] 02/21/13 09:46:50 viaNetwork InterfaceIndex 0
BENGINE:  [02.21.13 09:46:50] [0000]     [13392] 02/21/13 09:46:50 viaNetwork subnet 192.168.0.0
BENGINE:  [02.21.13 09:46:50] [0000]     [13392] 02/21/13 09:46:50 viaNetwork PrefixLength 24
BENGINE:  [02.21.13 09:46:50] [0000]     [13392] 02/21/13 09:46:50 viaNetwork ipAddr <zero>
BENGINE:  [02.21.13 09:46:50] [0000]     [13392] 02/21/13 09:46:50 viaNetwork FallBackOptions 0xD  Protocol Tunnel NIC

With this setting, the _test_ job runs fine, but the real ones, transferring data don't (german error messages):

Endgültiger Fehler: 0xe00084f8 - Die Netzwerkverbindung mit Backup Exec Remote Agent wurde unterbrochen. Überprüfen Sie, ob ein Netzwerkfehler vorliegt. Endgültige Fehlerkategorie: Ressourcenfehler Zusätzliche Informationen zu diesem Fehler finden Sie unter der Verknüpfung V-79-57344-34040

V-79-57344-65072 - Die Verbindung mit dem Zielsystem ging verloren. Sicherungssatz abgebrochen.
V-79-57344-65072 - Die Verbindung mit dem Zielsystem ging verloren. Sicherungssatz abgebrochen.

It transfers about 10% of the data, then just kills the connection.

I am completely at loss here, did somebody encounter anything like this before?
Appreciating any input I can get!

Thanks in advance,
Lennart

Tape Drivers for Sony AIT2

0
0
我需要解决方案

Hi,

I'm trialling Backup Exec 2012. I have a Sony AIT2 tape drive, which was purchased 5-10 years ago. It still works and used to work with Backup Exec v10d / v11.

When I try to install the Symantec tape drivers for this SCSI drive using the BE 2012 wizard it doesn't install anything.

Any thoughts?

If I an't install tape drivers I can't buy BE

Thanks

Chris

CIFS backup file size

0
0
我需要解决方案

We have Backup Exec 2012 running backups to CIFS on a Quantum DXi6700.  I've been looking into setting up the maximum file on the storage properties in Backup Exec because it was initially set to 4GB by the tech who configured it, which would make the backup job go to 'loading media' for a duration of 60 seconds after writing each 4GB file.  This adds up in a large backup job.  As a test I changed the maximum file size to 12GB and a test job was much faster.

My questions are, what is the impact of increasing the maximum file size settings, is there an optimal/recommended setting?  The only documentation that I could find states that Backup Exec will by default set the maximum file size to 50GB or the capacity of the disk.

Cheers


Backup Exec 12.5 RALUS Agent

0
0
我需要解决方案

Hi all,

 

I need to buy a Remote Agent for Linux [RALUS] licence for our Backup Exec 12.5 so we can backup our companies NAS [Netgear ReadyNAS Pro] drive to tape.

 

However, all of our suppliers keep supplying quotes for the Remote Agent for Linux for Backup Exec 2012. Is there a way that a licence can be bought for 12.5 - or will the 2012 licence be backwards compatible with it?

 

 Any help will be greatly appreciated!

8387751
1361443629

BE 2012 an RAW and independent disk on VMware

0
0
我需要解决方案

Hi guys,

 

 

how can i backup VM's with independent and RAW disks ?

 

in BE 2010 it was possible to exclude those disk but couldn't find same in BE 2012 ....

 

 

 

 

thank you

 

L

8387771
1361442185

Workaround to Backing up Exchange in Backup Exec Quick Start Edition

0
0
我需要解决方案

I've heard that as a workaround to backing up Exchange in BE QSE you can shut down Exchange while the Backup is running, and only if you have applied the tweak to disable AFE (Autmatic File Exclusion).

Is this simply creating a scheduled windows batch file to stop Exchange services before the backup begins and then start them again after the backup completes?

Can I also do this with SQL to backup MDF/LDF databases?

How do you disable AFE?

If anyone can help it would be much appreciated as I have an all in one server which needs complete backup and I only have BE QSE

Backup Exec 2012 - Servers with status Never Backed up

0
0
我需要解决方案

Hi all,

I have an frustrating issue with a bunch of virtual servers (currently 70)  that are dragged into CASO server and they are all listed as Never backed up.

These servers have no jobs connected to them, they have no agent installed locally, and there have never been a job or a agent on them.

If i remove them, they come back. For me that sounds like there is a setting on the CASO server that looks for servers somehow, or I have maybe failed during setup and installation of 2012.

Any one that have had this issue? Any tip to me regarding how i can remove them from the Backup and Restore tab overview? Any setting that i have not yet seen or found that can stop this madness ..lol :)

My environment:

1 CASO server

13 Managed backup exec servers

 Windows Server 2008 R2

 

 

 

 

 

BE2012 - Duplicate from DeDup Device is VERY slow

0
0
我需要解决方案

Hopefully someone can help me - I'm running out of ideas:

Problem:

We're using DeDuplication for the firststage-backup, afterwards the data is copied to external media - this time USB-disks (USB3 with USB3-controller)
The first stage is running fine, but the copy to usb is awfully slow - and gets slower every day.

It started with about 1400 MB/min, now it's down to 150-250 Mb/min.

To have a comparison to a "normal" duplicate to usb-job, I've created a b2d-device on the same storage as the dedup-foleder, made a backup and duplicated that to usb-disk - everthing identical, except the b2d-device used as a source instead of the dedup-device.

The result is about 6.000-7.500 MB/min - so the diskchannel and the usb-disk-channel is fine.

I don't have a problem with the slower speed from the dedup-device (due to the rehydrating) - as long it stays above 1000 MB/min, but it mustn't drop that far.

Environment:

BE2012 with actual updates. The hardware is a HP DL180G6, CPU: E5606, 12 GB RAM. 5 SAS 1 TB Harddisks attached to an HP SmartArray P410 with 256 MB Cache and battery. CPU usage below 50%, RAM-usage ~ 50%.

 

Any idea ?

Thx

Olaf

Problem 100 entries for restore job Backupexec 2012

0
0
我需要解决方案

I can not restore a SQL base because it reveals that the limit on the number of entries in Backup Set Time - 100 entries limit. How fix it?

Backup Exec 2012 shared with a Hyper-V Host

0
0
我需要解决方案

Hi,

My Server setup:

 

Dell R720 (running hyper-v and backup exec 2012 at the same time)

2x E5-2630

16 GB RAM

2x 15K SAS Drives

10x 7.2K NL SAS Drives

Windows 2008 R2 STD with Hyper V

 

Host OS

Windows 2008 R2 STD

Backup Exec 2012

 

VM1

Windows 2008 R2 STD

Milestone xProtect Express

------------------------------------

 

I need to backup just specific archive folders on my VM1 running xProtect Express.

As I understand a Remote Agent for Windows (RAWs) is required. In order to backup the folders on my VM 1.

Do I need to purchase any additional license or options ?

 

-------------------------------------

Can I point Backup Exec 2012 to use a SQL Express 2008 R2 running on a VM?

 

Thanks,

Paul

8393771
1361503380

Backup Exec 2012 Home Tab on Monitoring Screen

0
0
我需要解决方案

I've got 2 issues with the Home Tab of the Symantec Backup Exec 2012

1. Once in a while I get my graph of Backup size messed up as in the screen capture attached. Something happens that renders the graph wrong and in wrong color code. I can fix it by changing "Show Last:" Day(s) field but it's going to be a pain when I'm going to issue #2. This happens once a day on regular basis and flipping between tabs does not reset the view.

2. I want to set htis home screen on one of spare monitors that I us for monitoring. I'm not sure if BE2012 has an auto-refresh feature of the home screen (as for me, having such feature for such a nice interface is a must) So I'm not sure if setting up this view on Monitoring Screen will work at all.

Can someone point me to the right direction or is there a patch or some plug-in to make it work. Or is there a web interface that can be configured to display similar to Home Tab screen?

Backup Exec - Tape swap reports?

0
0
我需要解决方案

Hello,

We're a medium sized "branch" of a company, using Backup Exec instead of the bigger solution the other sites have.
Our manager noticed that the other sites (which do not use Backup Exec) have this procedure where an email gets sent to IT every morning, with a list of tapes that should be taken out and stored in the safe, and which tapes should be put in.

She now wants us to have the same solution, but using Backup Exec.

Is this possible?
Can you get such a report from Backup Exec? For instance, it does the daily backup, sends us an email saying "This tape (barcode) has just been used for the most recent backup. Please take it out. Also, put in this tape (barcode) which is now the oldest in the "queue", so we can overwrite it".

Tried to mess around with the alerts, but all it does is say "Hey, I just finished a job. I wont tell you what tapes were used or anything though."
Not really helpful at all.

8394671
1361524409

Backup Exec 2012 with Dell TL2000 and Cisco MDS 9148

0
0
我需要解决方案

Hi,

 

I plan to purchase a Dell TL2000 which will be connected to a Cisco MDS 9148.

After checking the MDS 9148 it is not listed under HCL.

 

Will backup exec support my Cisco MDS 9148 connected to a TL2000?

My environment has only a single backup exec 2012 server do I also need to purchase a san shared storage option (SSO)?

     ---> As I understand SSO is only used when you want to share a SAN base Tape Library between multiple backup exec servers.

 

Thanks,

Paul

 

 

8394411
1361522117

Recovery Exchange 2010 GRT problem wtih space on Backup server

0
0
我需要解决方案

Hi all!

Problem:

When I tried to recover individual mailbox from BackupExec Server, It used its own disk C:(screenshot4) for temporary Exchange storage and didn't use Disk, which I pointed in my recovery job.(screenshot2) on my Exchange Server.

In detail:

1) All backups job ran without problems.

I have a server BackupExec 2010 R3.

Name "01Backup". (Disk free space on C:\ - 6GB)

And Exchange Server 2010.

Name "01Exch01". (Disk free space on D:\ - 350GB). Exchannge database 120 GB placed on disk D:\.

In recovery panel I could checked individual items in mailbox, but then I tried to recovery them, I got a error

Completed status: Failed
Final error: 0xe000848f - Insufficient disk space.
Final error category: Resource Errors

For additional information regarding this error refer to link V-79-57344-33935
Restore- \\01EXCH01.gz.local\Microsoft Information Store\01MDB00
V-79-57344-33935 - The path on the media server for staging temporary restore data when restoring individual items from tape ran out of disk space. Either clear some disk space, or click Tools/Options/Restore and enter a path that has more disk space.

V-79-57344-65072 - Connection to the restore target has been lost.  Operation canceled.

 

 

Restore
V-79-57344-766 - Cannot log on to MAPI with the specified credentials. Review the resource credentials for the job, and then run the job again.

V-79-57344-760 - Unable to open the item Database - skipped.

 

BackupExec didn't use (screenshot2) Exchange Server for temporary recovering storage. It used his own disk C:\ (screenshot4) on 01backup.

Some other Screenshots if they could help.(screenshot1)

 

Can anybody help? I chosed right way, but it not worked.

 

be 2010 r3 sp2 CASO upgrade to BE 2012

0
0
我需要解决方案

hi guys,

 

 

we have 13 BE 2010 R3 SP2 servers one is the CASO server, we would like to upgrade to BE 2012  but the CASO first, after we will upgrade the CASO will all MMS running BE 2010 R3 Sp2 still be online and managabel from CASO or do we have to update them at all time ?

 

We also need to migrate the Backup Exec database from a 32 Bit OS (Windows 2003SP2-Standard – 32 Bit) to a 64 Bit OS (Windows 2008R2-Standard – 64 Bit). I understood from Technotes, that this migration is not supported from Symantec?

 

 

thank you in adv

 

 

Viewing all 6482 articles
Browse latest View live




Latest Images