Restore exchange 2007 from B2D doesn't worked. I've already reset the account for backup (xchbackup) but still have no luck. Any help would greatly be appreciated.
This problem is occurring on and off and the restore seem never work smoothly driven me crazy.
Details as below:
[5548] 02/20/13 16:58:32 [server] - JobEngine::LaunchJob
[5548] 02/20/13 16:58:32 [server] - RunJobWithGuidAndServer( {E0ACCD28-011E-4413-ACE3-27DF37AE44E1}, VM1 ) = 0
[2980] 02/20/13 16:58:32 [server] - Thread for job Restore 00502 ({E0ACCD28-011E-4413-ACE3-27DF37AE44E1}) starting
[2980] 02/20/13 16:58:32 [ndmp\ndmpclient] - viaNetwork enabled 0
[2980] 02/20/13 16:58:32 [ndmp\ndmpclient] - viaNetwork useAny 0
[2980] 02/20/13 16:58:32 [ndmp\ndmpclient] - viaNetwork protocol 1
[2980] 02/20/13 16:58:32 [ndmp\ndmpclient] - viaNetwork subnet ---><---
[2980] 02/20/13 16:58:32 [ndmp\ndmpclient] - viaNetwork MAC ---><---
[2980] 02/20/13 16:58:32 [ndmp\ndmpclient] - viaNetwork IPv4 Enabled 0
[2980] 02/20/13 16:58:32 [ndmp\ndmpclient] - viaNetwork IPv4 subnetAddress 0.0.0.0
[2980] 02/20/13 16:58:32 [ndmp\ndmpclient] - viaNetwork IPv4 subnetMask 0.0.0.0
[2980] 02/20/13 16:58:32 [ndmp\ndmpclient] - viaNetwork IPv4 autoObtain 0
[2980] 02/20/13 16:58:32 [ndmp\ndmpclient] - viaNetwork IPv4 physical
[2980] 02/20/13 16:58:32 [ndmp\ndmpclient] - viaNetwork selectedProtocol 1
[2980] 02/20/13 16:58:32 [ndmp\ndmpclient] - viaNetwork InterfaceIndexProtocol 0
[2980] 02/20/13 16:58:32 [ndmp\ndmpclient] - viaNetwork InterfaceIndex 0
[2980] 02/20/13 16:58:32 [ndmp\ndmpclient] - viaNetwork subnet <zero>
[2980] 02/20/13 16:58:32 [ndmp\ndmpclient] - viaNetwork PrefixLength 0
[2980] 02/20/13 16:58:32 [ndmp\ndmpclient] - viaNetwork ipAddr <zero>
[2980] 02/20/13 16:58:32 [ndmp\ndmpclient] - viaNetwork FallBackOptions 0x6 NIC Subnet
[2652] 02/20/13 16:58:32 [server] - Updating status for: 'Restore 00502' (0x0 0x0)
[2652] 02/20/13 16:58:32 [server] - Status for: 'Restore 00502' updated
[2980] 02/20/13 16:58:32 [server] - Checking for Evaluation expiration.
[2980] 02/20/13 16:58:32 [engapi] - ENGSCRPT: ConvertDeviceName osId = 0X46
[2980] 02/20/13 16:58:32 [engapi] - ENGSCRPT: IN - oldDeviceName = \\Exchange-Server.domain.com\Microsoft Information Store\First Storage Group
[2980] 02/20/13 16:58:32 [engapi] - ENGSCRPT: OUT - newName = \\Exchange-Server.domain.com\Microsoft Information Store\First Storage Group
[2980] 02/20/13 16:58:32 [engapi] - BSD date: 2:18:113 time: 21:3:42
[2980] 02/20/13 16:58:32 [server] - Failed to Load AllowExcludes key, We will update DR file evenif there are userExcludes. Error: 5
[2980] 02/20/13 16:58:32 [server] - Enter RestoreMessageHandler::SetTargetDeviceName
[2980] 02/20/13 16:58:32 [server] - OS ID is [0x46]
[2980] 02/20/13 16:58:32 [server] - Target OS ID is [0x46]
[2980] 02/20/13 16:58:32 [server] - Device Subtype is [0x2]
[2980] 02/20/13 16:58:32 [server] - Queried Device: \\Exchange-Server.domain.com\Microsoft Information Store\First Storage Group
[2980] 02/20/13 16:58:32 [server] - Exit SetTargetDeviceName - deviceName: [\\Exchange-Server\Microsoft Information Store\First Storage Group]
[2980] 02/20/13 16:58:32 [loops] - NDMPAgentConnector:SetupConnection(): Data Server = VM1
[2980] 02/20/13 16:58:32 [ndmp\ndmpcomm] - Could not resolve the "bews-ndmp" or the "ndmp" service, error code: 10109, using port 10000
[2980] 02/20/13 16:58:32 [ndmp\ndmpcomm] - ndmpConnectEx: 'VM1' resolves to the local machine itself. So, we will try and connect to a loopback address ...
[2980] 02/20/13 16:58:32 [ndmp\ndmpcomm] - ndmpConnectEx : Control Connection information: A connection was established between end-points 127.0.0.1:3038 and 127.0.0.1:10000.
[2980] 02/20/13 16:58:32 [ndmp\ndmpclient] - NDMP version 3 connection CONNECTED
[2980] 02/20/13 16:58:32 [loops] - NDMPAgentConnector::AuthenticateClient(): Using SSPI authentication with SLA/DLA as a fallback
[2980] 02/20/13 16:58:32 [loops] - NDMPAgentConnector::ConnectAuthUseSSPIasDefault(): Attempting SSPI authentication...
[2980] 02/20/13 16:58:33 [ndmp\ndmpcomm] - NDMP_SSPI: InitializeSecurityContext status 0x00090312 in 0 out 57
[2980] 02/20/13 16:58:33 [ndmp\ndmpcomm] - NDMP_SSPI: InitializeSecurityContext status 0x00000000 in 204 out 72
[2980] 02/20/13 16:58:33 [ndmp\ndmpcomm] - NDMP_SSPI: client authenticated with server
[2980] 02/20/13 16:58:33 [loops] - NDMPAgentConnector::ConnectAuthUseSSPIasDefault(): SSPI authentication success.
[2980] 02/20/13 16:58:33 [BESocket] - @@@@@@@MyCloseSocket called with sockfd = 1652(0x674) retval = 0
[2980] 02/20/13 16:58:33 [loops] - NDMPAgentConnector::EndConnection(): Data Server = VM1
[2980] 02/20/13 16:58:33 [loops] - NDMPAgentConnector:SetupConnection(): Data Server = Exchange-Server
[2980] 02/20/13 16:58:33 [ndmp\ndmpcomm] - Could not resolve the "bews-ndmp" or the "ndmp" service, error code: 10109, using port 10000
[2980] 02/20/13 16:58:33 [ndmp\ndmpcomm] - ndmpConnectEx: Querying the neighbour advertisement cache to discover information on 'Exchange-Server' ...
[2980] 02/20/13 16:58:33 [ndmp\ndmpcomm] - ndmpConnectEx : Control Connection information: A connection was established between end-points 192.168.50.34:3040 and 192.168.50.5:10000.
[2980] 02/20/13 16:58:33 [ndmp\ndmpclient] - NDMP version 3 connection CONNECTED
[2980] 02/20/13 16:58:33 [loops] - IsLocalAgent:beclass::BEConvertServerNamePlus returned error: 87
[2980] 02/20/13 16:58:33 [loops] - IsLocalAgent:beclass::BEConvertServerNamePlus returned error: 87
[2980] 02/20/13 16:58:33 [BESocket] - @@@@@@@MyCloseSocket called with sockfd = 1344(0x540) retval = 0
[2980] 02/20/13 16:58:33 [loops] - NDMPAgentConnector::EndConnection(): Data Server = Exchange-Server
[2980] 02/20/13 16:58:33 [loops] - In CustomReordereBSD.
[2980] 02/20/13 16:58:33 [server] - Enter RestoreMessageHandler::GetMachineName
[2980] 02/20/13 16:58:33 [server] - Exit GetMachineName - Machine name: [Exchange-Server]
[2980] 02/20/13 16:58:33 [server] - Enter RestoreMessageHandler::GetMachineName
[2980] 02/20/13 16:58:33 [server] - Exit GetMachineName - Machine name: [Exchange-Server]
[2980] 02/20/13 16:58:33 [loops] - NDMPAgentConnector:SetupConnection(): Data Server = Exchange-Server
[2980] 02/20/13 16:58:33 [ndmp\ndmpcomm] - Could not resolve the "bews-ndmp" or the "ndmp" service, error code: 10109, using port 10000
[2980] 02/20/13 16:58:33 [ndmp\ndmpcomm] - ndmpConnectEx: Querying the neighbour advertisement cache to discover information on 'Exchange-Server' ...
[2980] 02/20/13 16:58:33 [ndmp\ndmpcomm] - ndmpConnectEx : Control Connection information: A connection was established between end-points 192.168.50.34:3041 and 192.168.50.5:10000.
[2980] 02/20/13 16:58:33 [ndmp\ndmpclient] - NDMP version 3 connection CONNECTED
[2980] 02/20/13 16:58:34 [loops] - IsLocalAgent:beclass::BEConvertServerNamePlus returned error: 87
[2980] 02/20/13 16:58:34 [loops] - IsLocalAgent:beclass::BEConvertServerNamePlus returned error: 87
[2980] 02/20/13 16:58:34 [loops] - This BSD requires PDI restore. Checking to see if FS supports it
[2980] 02/20/13 16:58:34 [loops] - NDMPRAHostRestoreEngine::IsPDIRestoreSupported( ) - Querying application server(Exchange-Server) for PDI support.
[2980] 02/20/13 16:58:34 [loops] - Application server(Exchange-Server) supports PDI
[2980] 02/20/13 16:58:34 [loops] - Querying PDI data store server(VM1) for PDI support.
[2980] 02/20/13 16:58:34 [loops] - NDMPAgentConnector:SetupConnection(): Data Server = VM1
[2980] 02/20/13 16:58:34 [ndmp\ndmpcomm] - Could not resolve the "bews-ndmp" or the "ndmp" service, error code: 10109, using port 10000
[2980] 02/20/13 16:58:34 [ndmp\ndmpcomm] - ndmpConnectEx: 'VM1' resolves to the local machine itself. So, we will try and connect to a loopback address ...
[2980] 02/20/13 16:58:34 [ndmp\ndmpcomm] - ndmpConnectEx : Control Connection information: A connection was established between end-points 127.0.0.1:3042 and 127.0.0.1:10000.
[2980] 02/20/13 16:58:34 [ndmp\ndmpclient] - NDMP version 3 connection CONNECTED
[2980] 02/20/13 16:58:34 [loops] - NDMPAgentConnector::AuthenticateClient(): Using Default Account for proxy Authentication
[2980] 02/20/13 16:58:34 [loops] - NDMPEngine::SetupNDMPConnection(): Using the system default logon account
[2980] 02/20/13 16:58:34 [loops] - PDI data store server(VM1) supports PDI
[2980] 02/20/13 16:58:34 [BESocket] - @@@@@@@MyCloseSocket called with sockfd = 1728(0x6c0) retval = 0
[2980] 02/20/13 16:58:34 [loops] - NDMPAgentConnector::EndConnection(): Data Server = VM1
[2980] 02/20/13 16:58:34 [loops] - FS supports PDI.
[2980] 02/20/13 16:58:34 [server] - Enter RestoreMessageHandler::SetTargetDeviceName
[2980] 02/20/13 16:58:34 [server] - OS ID is [0x46]
[2980] 02/20/13 16:58:34 [server] - Target OS ID is [0x46]
[2980] 02/20/13 16:58:34 [server] - Device Subtype is [0x1]
[2980] 02/20/13 16:58:35 [server] - Queried Device: \\Exchange-Server.domain.com\Microsoft Information Store\First Storage Group
[2980] 02/20/13 16:58:35 [server] - Setting target path: [ittest5]
[2980] 02/20/13 16:58:35 [server] - Exit SetTargetDeviceName - deviceName: [\\Exchange-Server\Microsoft Information Store\First Storage Group]
[2980] 02/20/13 16:58:35 [loops] - ValidatePDILocation: Validating PDI location: [F:\ExchangeBK\IMG001652]. Temp path: [C:\TEMP]
[2980] 02/20/13 16:58:35 [server] - Media Label: IMG001652
[2980] 02/20/13 16:58:35 [loops] - Trying to create backup BSD \\Exchange-Server.domain.com\Microsoft Information Store\First Storage Group for PDI restore
[2980] 02/20/13 16:58:35 [loops] - Failed to Load AllowExcludes key, We will update DR file evenif there are userExcludes. Error: 5
[2980] 02/20/13 16:58:35 [loops] - NDMPAgentConnector:SetupConnection(): Data Server = VM1
[2980] 02/20/13 16:58:35 [ndmp\ndmpcomm] - Could not resolve the "bews-ndmp" or the "ndmp" service, error code: 10109, using port 10000
[2980] 02/20/13 16:58:35 [ndmp\ndmpcomm] - ndmpConnectEx: 'VM1' resolves to the local machine itself. So, we will try and connect to a loopback address ...
[2980] 02/20/13 16:58:35 [ndmp\ndmpcomm] - ndmpConnectEx : Control Connection information: A connection was established between end-points 127.0.0.1:3047 and 127.0.0.1:10000.
[2980] 02/20/13 16:58:35 [ndmp\ndmpclient] - NDMP version 3 connection CONNECTED
[2980] 02/20/13 16:58:35 [loops] - NDMPAgentConnector::AuthenticateClient(): Using SSPI authentication with SLA/DLA as a fallback
[2980] 02/20/13 16:58:35 [loops] - NDMPAgentConnector::ConnectAuthUseSSPIasDefault(): Attempting SSPI authentication...
[2980] 02/20/13 16:58:35 [ndmp\ndmpcomm] - NDMP_SSPI: InitializeSecurityContext status 0x00090312 in 0 out 57
[2980] 02/20/13 16:58:35 [ndmp\ndmpcomm] - NDMP_SSPI: InitializeSecurityContext status 0x00000000 in 204 out 72
[2980] 02/20/13 16:58:35 [ndmp\ndmpcomm] - NDMP_SSPI: client authenticated with server
[2980] 02/20/13 16:58:35 [loops] - NDMPAgentConnector::ConnectAuthUseSSPIasDefault(): SSPI authentication success.
[2980] 02/20/13 16:58:35 [loops] - PDIRestoreBSDProcessor::EstablishPDIDataConnection() - data connection established successfully.
[2980] 02/20/13 16:58:35 [loops] - PDIRestoreBSDProcessor::ProcessPDIDataTransfer: Starting data transfer between Exchange-Server and VM1
[2652] 02/20/13 16:58:37 [server] - Updating status for: 'Restore 00502' (0x0 0xB)
[2652] 02/20/13 16:58:37 [server] - Status for: 'Restore 00502' updated
[2980] 02/20/13 16:58:41 [loops] - data halted: INTERNAL ERROR
[2980] 02/20/13 16:58:41 [ndmp\ndmpcomm] - ERROR: 10 Error: Invalid device
[2980] 02/20/13 16:58:41 [server] - Enter RestoreMessageHandler::GetMachineName
[2980] 02/20/13 16:58:41 [server] - Exit GetMachineName - Machine name: [Exchange-Server]
[2980] 02/20/13 16:58:41 [BESocket] - @@@@@@@MyCloseSocket called with sockfd = 1716(0x6b4) retval = 0
[2980] 02/20/13 16:58:41 [loops] - NDMPAgentConnector::EndConnection(): Data Server = VM1
[2980] 02/20/13 16:58:41 [BESocket] - @@@@@@@MyCloseSocket called with sockfd = 1344(0x540) retval = 0
[2980] 02/20/13 16:58:41 [loops] - NDMPAgentConnector::EndConnection(): Data Server = Exchange-Server
[2980] 02/20/13 16:58:41 [server] - Removing 'Restore 00502' from status update list
[2980] 02/20/13 16:58:41 [server] - Updating status for: 'Restore 00502' (0x18 0xB)
[2980] 02/20/13 16:58:41 [server] - Status for: 'Restore 00502' updated
[2980] 02/20/13 16:58:41 [server] - Merging of BE / VSR Job Logs not necessary for this Type of Job
[2980] 02/20/13 16:58:41 [server] - Ending job 'Restore 00502' with error status (-536836980)
[2980] 02/20/13 16:58:41 [server] - Job thread terminating