Hi All
We have the following set up in our network
1. Backup Exec 2014 server application is installed on a physical server which is running Windows 2008 Enterprise R2 Operating System
2. Dell TL4000 Robotic Tape Library is attached to the same physical on which the Backup Exec 2014 running
3. Backup Exec 2014 has detected the robotic tape library and communication between the library and the BE 2014 is working fine
4. We use Hitachi HUS 110 storage system which is connected through the fiber channel to a VMware host, disk space has been assigned to individual virtual machines/servers from this storage
5. Regular backup is scheduled on some of the critical servers that are virtual machines and hosted on VMware ESX host servers
6. We have configured the backup schedule individually fore each drives
7. It is observed that scheduled backup on all the drives starts off well and after backing up few Giga bytes, job fails with an error "Directory could not be found" although the directory is present and accessible
We are really furstrated with this backup failures and need a solution to get this resolved.
Appreciate if anyone can help us to resolve this issue.
Please let me know if you need any other details.
Thanks n regards
/\/agesh
