HP Storeever 1/8 G2 Autoloader Not Detected in Device Manager
我需要解决方案 This is not directly related to BackupExec 2014 (I am assuming)- HP Storever 1/8 G2 Autoloader LTO5 (does not show in device manager)- IBM X3650 Rackmount Server- HP H221 SAS HBA Controller...
View ArticleClik here to view.
Changing Roboric Library Partition Name BE2014
我需要解决方案 The online help and manual both suggest it is possible to rename the robotic library partitions, However, when I follow the instructions given, I cannot edit the existing partition name field...
View ArticleBackup Exec 2014 Global Excludes
我需要解决方案 What do I insert specifically into the Global Exlude Selections to exclude the Recycle Bin on all backups for Windows Server 2008 and above?Resource name \\*\*Path Name*.*
View ArticleIncrememental backup Server 2012 deduped volumes not working BUE 2014 (worked...
我需要解决方案 Seen similar posts a couple times but with no solutions ofered, so here goes again. This worked fine in BU Exec 2012, this is a new problem after upgrading to BU Exec 2014.Weekly Full back up...
View ArticleSymantec Backup Exec 2010: No Backup and Tape Ejecting Automatically
我需要解决方案 Hi All,i am using symantec Backup Exec 2010, so far it was working fine but from last two days i am experiencing problem.It's not performing Daily backup job, and ejecting the tape with no...
View ArticleTLS support for Backup Exec 2014
我需要解决方案 Hi, We have been trying to configure our Email notifications to use Office 365. We have setup a inbound connector for our sender IP address as well as the relevant credentials for TLS...
View ArticleLicenses problem with Backup Exec 2014
我需要解决方案 Hi All !Now I upgrade BE CAS 2010R3 to BE 2014.After reboot, console report that CAS use trial version. Maintenance Contract Information tab show is correct serial numbers, which match with...
View ArticleUnable to perform GRT backups of Hyper-V guests to Deduplication folder
我需要解决方案 I am using Backup Exec 2010 R3 SP4 to backup up our Hyper-V guests with the GRT option enabled but these jobs are failing since I have started using the evaluation license for the deduplication...
View ArticleBackup Exec 2012 replication option
我需要解决方案 Hello Everyone, I want to know a wat to work with replication with an offsite server, I have no experience with that, maybe someone have some information. Thanks for the help Alejandro
View ArticleBE2014 Mediaset Overwrite protection not shown
我需要解决方案 We defined a mediaset in BE2014 with protection fo 1 week and 8h appendable. But if you look at the media itself, the column of overwrite protection until shows no date, all tapes are...
View ArticleBackup Exec 2012 SP4 Update
我需要解决方案 Hi all,I have BEX 2012 V14.0 Rev 1798 x64 w/ SP1 and the last hotfix 205111. When I try to run live update I continuously get and errors that prevent the downloaded decompressed content to...
View Articlebackup exec 2012
我需要解决方案 good morning, I have a problem when I create a task backup backup exec 2012 I get this error message Error automaticNDMPcKPts / automatic TEMPndmpcKPt8-11233-1404919587, every time I give...
View ArticleBE2014, slow system state backups
我需要解决方案 Examples below: Win 2008 R2:Backed up 36 System State componentsProcessed 17,570,860,665 bytes in 20 minutes and 38 seconds. Throughput rate: 812 MB/min Compression Type: HardwareWin 2008...
View ArticleClik here to view.
vff Open Failure!
我需要解决方案 Hi,I am working with backup to disk and then duplicate to Tape, Exchange 2007, Failure appeared when duplicate to Tape! It came from one Day to another!Error Code E00002F7,V-79-57344-759 Unable...
View ArticleBackup sql filegroups with backup exec 2012 agent
我需要解决方案 How can i backup ms sql filegroups with BE 2012. There is no option to chose just one filegroup.
View Articlereports do not display content
我需要解决方案 Hello, the reports of Backup exec do not show the content by pressing the deploy, What option need in complement in the browsers for work properly? I attached a picture for better...
View ArticleBackup Exec Server Service won't start after latest LiveUpdate run
我需要解决方案 Has anyone else experienced after updating to the latest push from LiveUpdate for BackupExec 2014 the BackupExec Server service not starting? I thought at first it was an issue isolated to one...
View ArticleClik here to view.
Error: VSS snapshot already running on the target computer
我需要解决方案 Hi all,We recently started receving the following error for a hyper-v backup. V-79-10000-11233 - VSS Snapshot error. A Microsoft Volume Shadow Copy Service (VSS) snapshot is already running on...
View ArticleUnable to update Backup Exec 2012 remote agent to 2014 agent
我需要解决方案 Hi. I performed the update from Backup Exec 2012 to Backup Exec 2014 on my server yesterday which went fine, but now I'm left with only one problem. I have only one server out of 56 other...
View ArticleHyper-V Generation Support for BE 2014?
我需要解决方案 Hello! I am looking through all of the support information for BE 2014 and the Hyper-V agent, but I can't seem to find anything that says if the Hyper-V agent (Or V-Ray Edition) will or will...
View Article